Ceiling Light with Waterproof LED
This ceiling light brings Polycarbonate (PC) — impact-resistant into your lighting scheme. Its materials and form are the starting point for coordinating the fitting with your furniture and finishes. The listed light-source specification is Integrated LED — neutral white — fixed, non-replaceable.
Choosing and using this ceiling light
For sizing, the supplied measurements are Round S 10W (5×5×2″) — Round M 18W (7×7×2″) — Round L 24W (8×8×2″) — Oval S 10W (7×3×2″) — Oval M 18W (8×4×2″) — Oval L 24W (11×5×3″). Compare these with the mounting area or surface before choosing a position. Operation is listed as Not confirmed — assume non-dimmable. Where dimming depends on a bulb or external dimmer, confirm compatibility before installation. The specified connection or power arrangement is Hardwired — flush ceiling mount, fixings included. Check that it suits the planned installation.
Technical specifications
Design and dimensions
| Specification | Details |
|---|---|
| Material | Polycarbonate (PC) — impact-resistant |
| Sizes & wattage | Round S 10W (5×5×2″) — Round M 18W (7×7×2″) — Round L 24W (8×8×2″) — Oval S 10W (7×3×2″) — Oval M 18W (8×4×2″) — Oval L 24W (11×5×3″) |
Light source and operation
| Specification | Details |
|---|---|
| Light source | Integrated LED — neutral white — fixed, non-replaceable |
| Voltage | 90–260V AC |
| Dimmable | Not confirmed — assume non-dimmable |
Installation and other listed details
| Specification | Details |
|---|---|
| IP rating | IP65 — dust-tight and spray-water resistant |
| Coverage area | ~5–10 m² |
| Connection | Hardwired — flush ceiling mount, fixings included |




